AWWA C504 Flanged 3” to 24”
|
 |
- ANSI Class 125 flanged Class 150B or Class 250B rated ductile iron body - superior strength
- Ductile iron disc with 316SS seat edge - tough and corrosion resistant
- Fully rubber lined waterway with integral seat vulcanized to body - durable and corrosion resistant
- Class 150B has 304SS shaft, Class 250B has 17-4PH shaft per AWWA c504
- Standard traveling nut, worm gear or 10-position lever manual actuator
- Optional electric motor or pneumatic or hydraulic cylinder actuator
Standard Valve O & M
Standard Valve Data Sheets
Standard Valve Drawings
Get Specification
|
|
AWWA C504 Flanged 30” to 48”
|
 |
- ANSI Class 125 flanged cast iron (Class 150B rated) or ductile iron (Class 250B rated) body
- NSF-61 certified epoxy coated ductile iron disc with 316SS seat edge - tough and corrosion resistant
- Truly field adjustable and replaceable rubber seat in the body - retained and adjusted with stainless steel fasteners, not epoxy or glue!
- Class 150B has 304SS shaft, Class 250B has 17-4PH shaft per AWWA c504
- NSF-61 certified epoxy lined and coated - excellent corrosion resistance
- Standard worm gear or traveling nut manual actuator
- Optional electric motor or pneumatic or hydraulic cylinder actuator
Standard Valve O & M
Standard Valve Data Sheets
Standard Valve Drawings
Get Specification
|
|
AWWA C504 Mechanical Joint 3” to 24”
|
 |
- ANSI/AWWA C111/A21.11 Class 150B or Class 250B rated ductile iron body - superior strength
- Ductile iron disc with 316SS seat edge - tough and corrosion resistant
- Rubber seat molded and vulcanized to body - durable and corrosion resistant
- Class 150B has 304SS shaft, Class 250B has 17-4PH shaft per AWWA C504
- NSF-61 certified epoxy lined and coated - excellent corrosion resistance
- Standard buried service traveling nut or worm gear manual actuator
- Optional electric motor or pneumatic or hydraulic cylinder actuator
Standard Valve O & M
Standard Valve Data Sheets
Standard Valve Drawings
Get Specification
|
|
AWWA C504 Mechanical Joint 30” to 48”
|
 |
- ANSI/AWWA C111/A21.11 Class 150B or Class 250B rated ductile iron body - superior strength
- Ductile iron disc with 316SS seat edge– tough and corrosion resistant
- Truly field adjustable and replaceable rubber seat in the body - retained and adjusted with stainless steel fasteners, not epoxy or glue!
- Class 150B has 304SS shaft, Class 250B has 17-4PH shaft per AWWA C504
- NSF-61 certified epoxy lined and coated - excellent corrosion resistance
- Standard buried service worm gear or traveling nut manual actuator
- Optional electric motor or pneumatic or hydraulic cylinder actuator
Standard Valve O & M
Standard Valve Data Sheets
Standard Valve Drawings
Get Specification
|
|
AWWA C504 Wafer 3” to 20”
|
 |
- Ductile iron body fits between ANSI Class 125 or Class 150 flat face flanges - saves space
- Ductile iron disc with 316SS seat edge tough and corrosion resistant
- Fully rubber lined waterway with integral seat vulcanized to body - durable and corrosion resistant
- Standard traveling nut, worm gear or 10-position lever manual actuator
- Optional electric motor or pneumatic or hydraulic cylinder actuator
Standard Valve O & M
Standard Valve Data Sheets
Standard Valve Drawings
Get Specification
|
|
Traveling Nut Manual Operator
|
 |
- Designed and manufactured in accordance with AWWA C504, tested to 450 ft-lb input torque
- Above ground service supplied with handwheel and position indicator
- Buried service are grease packed and sealed with 2" square operating nut
- Stem extensions, stem guides, extended bonnets, floor stands, T-wrenches, chain wheels and other accessories are available
Standard Valve O & M
Standard Valve Data Sheets
Standard Valve Drawings
|
|
